Lenco L70
2013-05-15
2013-01-13
PIONEER PL 570
replaced with original wooden walnut
root.New custom dust cover.
Checked and repaired all electrical
and mechanical functions.
Made by Vintagetable
2012-03-11
Tube Tester Model 751
LAMPEMETRE DE SERVICE 751 by CENTRAD ETS ANNECY
A made in France tube tester for both American and European tubes since 1950.Voltage selector 110-245v 50Hz. Dimensions H450 - W340 - D165.
Weight 7Kg
2012-03-07
Thorens TD 124 MKII
The legendary TD124MKII after full restoration.The arm is the SAEC WE 308SX with the Zonotone z-shell headshell.The plinth is made from 4 layers of 2 different ply woods wraped with 5cm solid oak and veneered with burled oak.
Lowther P6M Ticonal
This is the early '57 version with square chassis and titanium & cobalt as ingredients on it's magnet, in contrary to the new Alnico series. They have the new foldered wizzer cones, new surrounding foam and new silver coils from Lowther. Extremely rare .2011-11-25
Pioneer PL 15 C
Pioneer Pl 15 c 1972 model ,semiautomatic,belt drive.
Two speed 33.3 - 45 rpm ,4pole synchronous motor,tonearm lift and antiskating with bias weight.
Two speed 33.3 - 45 rpm ,4pole synchronous motor,tonearm lift and antiskating with bias weight.
2011-09-06
RCA Victor 45J
RCA Victor 45J
45 rpm record player with automatic changer from RCA Victor.
It was manufactured between 1949-1951.
This unit designed to play through a tube radio equipped a phono input.
2011-06-19
2011-06-03
Rogers JR149 Loudspeakers
same KEF drive units as the famous LS3/5A (B 110 and T27),but housed in a heavy aluminium
cylinder with wooden end caps.
Power rating 60 watts ,8-16 ohms.
Garrard 4HF
This model was in production until 1965,
by which time about 100.000 units
had been produced.
It had the famous TPA 12 inch transcriptions
Pick up arm, with a plug-in headshell
2011-03-26
Sony PS-Q7
SONY PS-Q7 Record player Turntable
PS Q7 is a quarter- sized record player, automatic, direct drive,
With built-in headphones amplifier.
Since 1982 Sony created a very cute portable turntable,
available in red ,silver and black color.
It has a small aluminium platter 78mm, and two speeds 33-45
A dynamic balanced low mass tonearm and moving magnet
cartridge allow the stylus to track with greater accuracy.
Stylus type:ND-143G
Weight 2.5 kg
2011-03-02
Goldring Lenco GL75 - Lenco L75
Lenco GL75 custom.
Plinth from Finland birch plywood SME cut.
Tonearm Rotel RP 3000
Designed and made by Vintagetable
.
2011-01-20
SONY TC 377
bought it for 25 euros.It takes about two days to fixed everything wrong .
And the result was success!!Lubricated and cleaned
very well . Sony started to play.
Sony TC 377
2010-12-22
Pioneer SX 980
Power output 80 watts per channel into 8Ω
Frequency responce 5Hz 190kHz
Input sensitivity: 7.5mV(mic),2.5mV(MM)
150mV(DIN),1V (Pre out)
Signal to noise ratio 76db(MM),90db (line)
Output 150mV (line) ,30 mV (DIN) 1V (Pre out)
Dimensions 526 x 176 x 440mm
Weight 18.8 kg
Year 1978
2010-12-02
Sanyo TP 929
which the platter is a part of the motor.There is a
ring magnet on the platter and electromagnets on
the plinth
A very beautiful record player with new wooden
base.
Made by Vintagetable.
2010-11-10
Lenco L70 (custom plinth)
upgrade with new connector ,colar and washer from
an old unknown brand tonearm.Now you can fix
any universal headshell.
Made by Vintagetable.
2010-10-28
Rek-o-kut Rondine L34 Jr.
Born in 1952 this REK O KUT L34 Jr is a very early model.
Idler drive and heavy platter.
After full restoration the motor runs smooth and quiet.
The second stage was to find a good tonearm. My choice
was the Decca London international. It was the first time
using a unipivot tonearm.
The third stage was to make wooden plinth. I cut finland
Birch plywood and made a very massive plinth
Final stage was adjusting tonearm, cartridge and speed.
This is my Rek o kut restoration project. Designed and made by Vintagetable.
Subscribe to:
Posts (Atom)