SONY TC 377

I found this beautiful tape recorder in a fleamarket,
bought it for 25 euros.It takes about two days to fixed everything wrong .
And the result was success!!Lubricated and cleaned
very well . Sony started to play.

Sony TC 377

Pioneer SX 980

    Radio amplifier PIONEER SX 980.
Power output 80 watts per channel into 8Ω
Frequency  responce  5Hz 190kHz
Input sensitivity: 7.5mV(mic),2.5mV(MM)
150mV(DIN),1V (Pre out)
Signal to noise ratio 76db(MM),90db (line)
Output 150mV (line)  ,30 mV (DIN) 1V (Pre out)
Dimensions 526 x 176 x 440mm
Weight 18.8 kg
Year 1978

Sanyo TP 929

A extremely rare turntable model TP929 by SANYO
which the platter is a part of the motor.There is a
ring magnet on the platter and electromagnets on
the plinth
A very beautiful record player with new wooden
base.
Made by Vintagetable.

Lenco L70 (custom plinth)

 

Goldring Lenco GL59 (L70) 1962 after tonearm's
upgrade with new connector ,colar and washer from
an old unknown brand tonearm.Now you can fix
any universal headshell.
Made by Vintagetable.

Rek-o-kut Rondine L34 Jr.

Born in 1952 this REK O KUT L34 Jr is a very early model.

Idler drive and heavy platter.

After full restoration the motor runs smooth and quiet.

The second stage was to find a good tonearm. My choice

was the Decca London international. It was the  first time

using a unipivot tonearm.

The third stage was to make wooden plinth. I cut finland

Birch plywood and made a very massive plinth

Final stage was adjusting tonearm, cartridge and speed.

This is my Rek o kut restoration project. 
Designed and made by Vintagetable.

Thorens td 111

THORENS TD 111

In 1962 Thorens built a single speed high quality turntable.

TD 111 was the little brother of TD124 but more beautiful, and more simple.

Now it is hard to find a TD 111 for sale.

Picture above showing  my THORENS TD 111 pair with a

SME 3009 and an Audio -technica AT 440 MLA cartridge.
Made by Vintagetable.

Pioneer pl 560

The Pioneer PL-560 is a direct drive turntable

powered by a quartz PLL Hall motor .

The PL-560 features 33 1/3 and 45 rpm speeds.

A  light up VU meter monitoring the increace

or decreace in pitch control.

A warren motor also included in this model to

perform all the automatic functions.

All  perfect expect chassis! So I decided to made

a massive wooden plinth.

I think now is excellent.
Made by Vintagetable.

Lenco L78

Lenco L78 1978 model 

First attempt to make my own project.
A custom plinth for a Lenco.I think it was
a good construction. A heavy and massive
plinth from australian plywood.
The turntable was in a very nice condition
so i did not change anything .
The only one was motor restoration.
Of course i did change the oil!
Made by Vintagetable.